Boat Propeller from Dans Discount Boat Propellers and Marine Accessories 7

Dan's Discount Boat Propeller and boating accessories.

You have 0 items in your cart. View Cart | Go to Checkout Phone Orders Monday-Friday 8 am to 5 pm CST
1-877-512-7767 (PROP)

Super Discount Prices on all Items!

Total Category Items: 1510 Page 7 of63 Previous Page Next Page

Hustler Boat Propeller 13.25x17, 4 Blade Aluminum Right-Hand Rotation

Hustler® Aluminum Swept Cleaver 4 Blade Props for 40-150hp Engines with 4.25" Gearcases.
4 Blades That Re-wrote the Rules. The props that put the œfour� in Perfourmance! These props re-wrote the rules, proving that you can run a four blade that has:
- Unprecedented hole shot, lift, handling, ease of steering, and rough water stability.
- No top-end speed loss you experience with other manufacturers™ 4 blade propellers “ keeps 3 blade top end speed.
- Lifts the entire boat higher out of the water.
By lifting the hull higher, boats tend to lose less speed when fully loaded versus a three blade prop. With a lightly loaded boat, a three blade is usually the faster prop for most applications. Alternatively when an application is loaded down with extra people and gear, a three bladed prop can lose up to 3 MPH. This is because the hull is forced deeper into the water causing more wetted surface by the added weight. By lifting the hull higher the Turning Point 4 blade when fully loaded does not lose the top end speed compared to a three blade propeller.
Stainless steel performance at aluminum prices.
4 blade Swept Cleaver prop that has 3 blade top end speed with fast hole shot and unmatched handling.
Tuned exhaust vents improve hole shot and "Best in class" reversibility.
Squeeze casting adds strength that boosts performance.
Protected by five-step powder-coated finish.
Propellers fit Evinrude®, Honda®, Johnson®, Mariner®, Mercury®, MerCruiser®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, & Yamaha® Outboards and Sterndrives.
Uses 500 series Installation/hub kits only.
See application chart for engine application information and required Installation/hub kit part numbers.

View Details

Hustler Boat Propeller 14.5x17, 4 Blade Aluminum Right-Hand Rotation

Hustler® Aluminum Dual Geometry 4 Blade Props for 90-300+hp Engines with 4.75" Gearcases.
4 Blades That Re-wrote the Rules. The props that put the œfour� in Perfourmance! These props re-wrote the rules, proving that you can run a four blade that has: - Unprecedented hole shot, lift, handling, ease of steering, and rough water stability. - No top-end speed loss you experience with other manufacturers™ 4 blade propellers “ keeps 3 blade top end speed. - Lifts the entire boat higher out of the water. By lifting the hull higher, boats tend to lose less speed when fully loaded versus a three blade prop. With a lightly loaded boat, a three blade is usually the faster prop for most applications. Alternatively when an application is loaded down with extra people and gear, a three bladed prop can lose up to 3 MPH. This is because the hull is forced deeper into the water causing more wetted surface by the added weight. By lifting the hull higher the Turning Point 4 blade when fully loaded does not lose the top end speed compared to a three blade propeller.
This Dual Geometry propeller is uniquely engineered with two blade geometries: two blades utilize the Hustler high performance variable rake and aggressive pitch design for incredible hole shot and cornering, and two blades utilize an offshore style design for high speed and maximum stern lift. These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers™ propellers.
Stainless steel performance at aluminum prices with tuned exhaust vents improve hole shot.
4 blade Dual Geometry prop that has 3 blade top end speed with fast hole shot and unmatched handling.
Squeeze casting adds strength that boosts performance with protected by five-step powder-coated finish.
Propellers fit COX®, Evinrude®, Honda®, Johnson®, Mariner®, Mercury®, MerCruiser®, Nissan®, OMC®, OXE®, Parsun®, Suzuki®, Tohatsu®,Volvo Penta®, & Yamaha® Outboards and Sterndrives.
Uses 500 series Installation/hub kits only.
See application chart for engine application information and required Installation/hub kit part numbers.

View Details

Hustler Boat Propeller 14x19, 4 Blade Aluminum Right-Hand Rotation

Hustler® Aluminum Dual Geometry 4 Blade Props for 90-300+hp Engines with 4.75" Gearcases.
4 Blades That Re-wrote the Rules. The props that put the œfour� in Perfourmance! These props re-wrote the rules, proving that you can run a four blade that has: - Unprecedented hole shot, lift, handling, ease of steering, and rough water stability. - No top-end speed loss you experience with other manufacturers™ 4 blade propellers “ keeps 3 blade top end speed. - Lifts the entire boat higher out of the water. By lifting the hull higher, boats tend to lose less speed when fully loaded versus a three blade prop. With a lightly loaded boat, a three blade is usually the faster prop for most applications. Alternatively when an application is loaded down with extra people and gear, a three bladed prop can lose up to 3 MPH. This is because the hull is forced deeper into the water causing more wetted surface by the added weight. By lifting the hull higher the Turning Point 4 blade when fully loaded does not lose the top end speed compared to a three blade propeller.
This Dual Geometry propeller is uniquely engineered with two blade geometries: two blades utilize the Hustler high performance variable rake and aggressive pitch design for incredible hole shot and cornering, and two blades utilize an offshore style design for high speed and maximum stern lift. These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers™ propellers.
Stainless steel performance at aluminum prices with tuned exhaust vents improve hole shot.
4 blade Dual Geometry prop that has 3 blade top end speed with fast hole shot and unmatched handling.
Squeeze casting adds strength that boosts performance with protected by five-step powder-coated finish.
Propellers fit COX®, Evinrude®, Honda®, Johnson®, Mariner®, Mercury®, MerCruiser®, Nissan®, OMC®, OXE®, Parsun®, Suzuki®, Tohatsu®,Volvo Penta®, & Yamaha® Outboards and Sterndrives.
Uses 500 series Installation/hub kits only.
See application chart for engine application information and required Installation/hub kit part numbers.

View Details

LE1/LE2-1315-4 Hustler Propeller 13.5 X 15, 4BL AL RH
LE1/LE2-1315-4 Hustler Propeller 13.5 X 15, 4BL AL RH

View Details

MasterGuard Installation Kit 503

MasterGuard 500 Series Installation Kit for Engines with 4.25" or 4.75" Gearcases
Lifetime warranty for engines under 200hp with aluminum or stainless steel props and engines 200+hp with aluminum props only.
MasterGuard Installation/Hub Kits carry the only Lifetime Warranty in the WORLD!
Hubs have no warranty restrictions, except for extreme commercial use.
Saves a boater up to 33% on replacement propeller purchases (need to purchase prop housing only).
One piece design: durable marine Bronze with Over Molded Glass Filled Nylon for Long Life.
Re-useable after a Prop Strike.
Warranted even if the prop is Destroyed! (consumer normal use only, not applicable on commercial applications)
Enhanced lower unit protection.
Warranted even if used in competitive propeller housings (Mercury, Michigan Wheel, Solas)
Each kit contains a hub, thrust washer, and other hardware for installing Turning Point Express Mach3, Mach3 OS, Mach4, and Hustler propeller housings on most engines with 4.25" or 4.75" gearcase.
Also used as a hub upgrade to fit Solas Rubex, Michigan Wheel XHS, and Mercury FloTorq propeller housings.
Installation Kits for Evinrude®, Honda®, Johnson®, Mariner®, Mercury®, MerCruiser®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, & Yamaha® Outboards and Sterndrives.
See application chart for engine application information.